Transform your living space with the timeless elegance of wood blinds. At Made in the Shade Chester County, we believe that the right window treatments can elevate your home’s aesthetic while providing practical benefits such as light control and privacy. We serve Kennett Square, West Chester, Exton, Chadds Ford, Glen Mills, Concordville, Thornton, Chester Springs, Downingtown, West Goshen, East Goshen, Frazer, Malvern, Paoli, and the surrounding areas!
In this guide, we’ll walk you through the process of fitting wooden window blinds to ensure a perfect finish. And remember, we’ll bring the showroom to you! Request a
free in-home consultation today and let our experts assist you in choosing the ideal window treatments for your home.
Step 1: Gather Your Tools
Before you start, make sure you have the following tools:
- Tape measure
- Pencil
- Drill
- Screwdriver
- Level
- Step ladder
Having the right tools on hand will make the installation process smoother and more efficient.
Step 2: Measure Your Windows
Accurate measurements are crucial for a perfect fit. Measure the width and height of your window frame in three places – top, middle, and bottom. Use the narrowest width and the shortest height to ensure your wood blinds fit correctly. For inside mounts, subtract 1/4 inch from the width. For outside mounts, add 2-3 inches to the width and height for better coverage and light control.
Step 3: Mark the Bracket Positions
Hold the mounting brackets against the window frame where you want to install them. Use a pencil to mark the screw holes. Ensure the brackets are level and aligned for a neat installation. If you’re opting for an inside mount, position the brackets close to the top corners of the window frame. For outside mounts, place the brackets slightly above and outside the window frame.
Step 4: Drill Pilot Holes
Using a drill, create pilot holes at the marked positions. Pilot holes make it easier to drive in the screws and help prevent the wood from splitting. This step is especially important for wooden window frames.
Step 5: Attach the Brackets
Secure the mounting brackets to the window frame using the screws provided. Double-check that the brackets are level before tightening the screws completely. A level installation ensures that your wood blinds will hang straight and operate smoothly.
Step 6: Install the Headrail
With the brackets securely in place, it’s time to attach the headrail. Snap the headrail into the brackets, making sure it clicks into place. Some models may require you to tighten screws or clips to secure the headrail. Follow the manufacturer’s instructions for your specific wood window blinds.
Step 7: Attach the Valance
Most
wood blinds come with a decorative valance that conceals the headrail and mounting brackets. Attach the valance clips to the headrail, then snap the valance into place. The valance adds a finished look to your window treatment and enhances the overall aesthetic.
Step 8: Test Your Blinds
Lower and raise the blinds to ensure they operate smoothly. Adjust the tilt mechanism to check that the slats move easily and provide the desired level of light control and privacy. If you encounter any issues, refer to the manufacturer’s troubleshooting guide or contact Made in the Shade Chester County for assistance.
Step 9: Enjoy Your New Wood Blinds
Step back and admire your handiwork! Your new
wood blinds should enhance the beauty of your home while offering functional benefits. Whether you chose natural wood blinds for their rich texture or painted wood blinds for a modern touch, you can enjoy the timeless elegance they bring to your space.
At Made in the Shade Chester County, we are committed to helping you find the perfect window treatments for your home. From professional measuring to expert installation, we provide comprehensive services to ensure your satisfaction. Discover the beauty and versatility of wood blinds for window by scheduling a
free in-home consultation with us today. We’ll bring the showroom to you!
